2016 Bead Peeps Swap N Hop REVEAL

So the last few months have been kind of crazy.  We have this whole big kerfuffle going on with (our now) old landlord.  I’m not sure we’re quite done with him as we will likely have to sue but at least we’re not living there anymore!  So we moved last Monday – it took us 19 hours between the time we picked up the Uhaul truck and when we dropped it off (at 5 am – yea that wasn’t a fun night, but thankfully I had asked for Tuesday off).   The biggest upside of our new place is the garage – it’s HUGE (practically bigger then our house) so the majority of our stuff ended up out there so I can go through it at will and not have to trip over it in the house.  The downside? I currently have no bead room – well I do but it’s not set up yet.  The desk is in there but I still have to get my chair, my beads and everything else in.  And then in a (hopefully) few months when part of the garage gets converted to my bead room I get to move it all out again!

So on to the swap reveal:

First – what is the Bead Peeps Swap N Hop?  It’s an annual event (we’re in the 2nd year) where designers sign up, get a partner and then swap beads with that partner.  They make a piece (or lots of pieces) of jewelry incorporating what they were sent, then do a blog post reveal, where you can hop around to ooh and aah at everything!  This event is hosted by Linda Anderson of Cherry on Top Design

If you follow my blog you’ll have seen my previous post about my partner Bobbie Rafferty, who was even nice enough to send me extra seed beads since she didn’t know the manufacturer/number!

I was out of character the last few months and did not wait until the last moment to start things – as soon as I unwrapped everything I was searching for ideas and inspiration – which was easy to do considering how much my partner sent me! Here’s a reminder of what I received:

In total I made 17 individual pieces, though some belong in sets, this is how it broke down:

2 sets

4 bracelets

3 necklaces

3 earrings

3 rings

 

As the number of my pieces increased so did my desire to use every type of bead that was sent to me, not necessarily ALL of them in terms of quantity, but as least use them all once.  This became the ultimate goal.  Last year I had 2 partners, and didn’t even come close to using every type that was sent to me and it left me feeling like I hadn’t done enough.  So did I hit my goal?

Sadly no, the hollow jade squares I just couldn’t get to talk to me. I thought earrings first, or maybe the side of a focal on a bracelet. But just couldn’t make it work. I also didn’t use the Cinnabar fish focal, I’m saving that for later.

But here’s what I did make:

RINGS:

20160514_174612-1_wm

Beads used: seed beads, mother-of-pearl

20160514_174746-1_wm

Beads used: Moonstone, 15/0, AB rounds

20160515_081834_wm

Beads used: AB rounds

EARRINGS:

20160514_175428-1_wm

Beads used: crystal briolettes

20160515_081915-1_wm

Beads used: AB rounds, 15/0, seed beads

20160515_082007-1_wm

Beads used: seed beads, 15/0, unakite

BRACELETS:

20160514_174922-1_wm

Beads used: seed beads, 8/0(core)

20160514_175001-1_wm

Beads used: AB rounds, 15/0

20160514_174839-1_wm

Beads used: seed beads, 15/0

20160514_175016-1_wm

Beads used: czech ovals

20160514_175056-1_wm

Wearing them all

NECKLACES:

20160514_175510-1_wm

Beads used: ocean jasper focal, 15/0, delica

20160514_175722-1_wm

Beads used: jasper, seed beads, bugles, 15/0

20160515_081753-1_wm

Beads used: seed beads, long magatama

SETS:

20160514_175918-1_wm

Beads used: Carved bone, dyed carved bone, clasp, seed beads, 15/0, 8/0 (core) Everything except the earwires was from my partner

20160514_175837-1_wm

Beads used: jasper, delica, 15/0, seed beads

So I definitely feel accomplished!  Hope you enjoyed looking, don’t forget to visit everyone else:

 

Palak (aka Pallavi Asher)http://kalaabhushan.blogspot.in/
Lori Blanchard YOU ARE HERE

Duality

I’ve always felt that my journey through jewelry making has been very organic.  I started making jewelry when I needed “quick, easy and cheap” Christmas presents for my family about 5ish years ago.  Little did I know the journey I’d be thrust into.  Simple stringing was my choice for that time, but my mom quickly sent me a jewelry making book that included an amazing bead weaving pattern – and I started out on my first bead woven piece.

Since then I’ve taken on bead weaving and wirework, have made my own cabochons and am looking to make my own metal components soon (just need a saw, and hammer and….everything!)

But I’ve found my greatest leaps and achievements have been through challenges.  If you make jewelry and have never participated in a challenge – any challenge – I urge you to do so.  It pushes your boundaries and makes you think of designs that you wouldn’t have before.  Which brings me to this post.

This challenge was issued by Sarah Rose who runs Jewelry Because, you can read about her great mission here.  What was the challenge?  Create a necklace that represents your personality.  When I first read this I was leaving one store at work to drive for another – and driving is often where I come up with some great ideas – so I thought really really hard about it.  What did I come up with?

image

So how the hell was I going to make this into a necklace?  I really had no clue – but everyone really wanted to see it! So I felt compelled to at least try.

So I sat down again, this time at home, and put a lot of thought into it – what was my personality?  Ask my cousin or my sister, and they’ll tell you I’m crazy (if you saw any of our videos from my summer vacation you’ll see this).  Ask my coworkers and they’ll tell you I’m kind of quiet and do what I need to do to get things done.  Ask some of my friends and they’ll say I’m an animal lover, or a badass biker, or a great jewelry maker.  But who do I feel I am? I’m all of them!

So this is what I made:  (I’ll explain all the parts and pieces and why I chose them after the pics)

n6 (2)

The gem in the middle is a gorgeous piece of laboradorite with a lot of hidden flash (like me!).  The shape of the stone represents both my tough side (sharp edges) and my flashier side (hidden yet out in the open at the same time).

n6 (8)

The “softer” side of my personality is represented by some shibori silk and a pewter angel wing (everyone calls me Raven).  A little bit of flash/surprise is thrown in with the delica beads that color shift.  The simplicity of the design also shows me as even when I “dress up” it’s simple, very little makeup, very little time spend on my hair.
The “tougher” side is shown through the leather and the dagger(supposed to represent a horn). The leather is a recycled/upcycled leather vest because I ride motorcycles (hubby just bought me a new one for our anniversary!!)).  The delica here also have some flash – and that was on purpose, because sometimes even when being badass you want to look good. (I beaded my name for my leather (see below)).   Notice that the shape of each side also shows these elements – rounded/soft, pointed/tough.

image

n6 (7)

Since the necklace is split down the middle I decided to do that with the clasp as well – the soft side is the ring, in the flashy delica.  The bar is 2 daggers – pointy and lethal! lol

n6 (3)

 

The “tough” side necklace is made up of daggers and a lampwork barrel.  They’re wrapped with black permanately colored copper wire.  The wraps are very rustic and elementary, a far cry from the usual neat and smooth wrap I usually go for.

n6 (5)

The “soft” side necklace is labrodorite coins (purchased from Sarah herself) – again they have that surprise flash at unexpected moments – interwoven with random seed beads – you never know what you’re going to get!!

n6

Each of the elements in this necklace was chosen with great care – and I believe is ME, very much so that duality that sometimes I can never even reconcile myself.

Do you have that duality? Could you see yourself in this necklace?

So what does my personality look like?

life * love * beads

Haby Hop (final reveal)

Well over a year ago I signed up for a blog hop with Melissa Trudinger called the Haberdashery Hop.   While the reveal was Aug 2nd (2014) and I missed it by a LONG shot, I felt the need to finish it. 

What is haberdashery?  It’s small articles used for sewing – these days in stores like JoAnn’s they’re called “notions”.  So what do these include? Why buttons, of course!  A few years ago on a random walk through an antique store I picked up a large mason jar of buttons.  It moved around with me and I made a few things from them, like these cute button earrings:

image

Button earrings, living with my cousin now

So when Melissa posted about hosting this hop I jumped at the idea….I had been thinking of doing a zipper and button piece but it didn’t really go any further then a thought in my head.  Now I had a reason to get it out in the world!  My initial design started out slightly different and you can read about that here.

So I got out my mason jar of buttons and dumped the whole thing on the table.  What did I want to do? What was my color scheme?  I don’t even know how I picked orange and pink to go together but soon I had a generous pile of orange, pink, black and a few white buttons staring back up at me, there were over 50 there of various sizes.  I did some research and discovered the buttons are likely bakelite and celluloid, types of plastics used in the early 20th century.

Then my bead stash came out and I picked 4-5 coordinating delica and 15/0 to go with them all.  I picked 4 different colors of delica: frost, black, pink and transparent salmon; as well as 6 different colors of 15° : black, frost, orange, color-lined dark salmon, silver and light pink. 

I glued my buttons onto pellon and started bezeling them.  One of my first decisions was that no 2 bezels would be the same.  I had multiple buttons of the same size/color so I would do them in groupings.  As I did the first I would count how many beads it took so that I could decide my patterns for the next button. So every single button is unique! 

I didn’t get very far into the process before the reveal date was suddenly just there – and I was no where close to done.  And because the reveal date had gone, my motivation kinda went with it…..the buttons were always within my view but the need to get them done just wasn’t there anymore.   I would work on them here and there.  When the bezeling was done then came the part I hate the most: EDGING…..  It’s just so monotonous. 

Then in the beginning of September I tackled them again and suddenly the edging was done!

image

Now came the even harder part – something I’ve never done before – putting multiple pieces together to form a necklace.  And it has to hang right! A friend gave me a mannequin to use – and it was perfect because it was styrofoam base so I could pin into it.  So I pinned the buttons on to it for shaping.  Then once again it sat there because I was terrified of putting it together – I didn’t know how to do this and if I did it wrong….there’s all that work just out the window!  So I started with the easy part – the straps – just a simple stack of buttons in a straight line.  I did each one individually with a VERY long piece of fireline.  Then I had to start shaping the neckline – again it just sat there – that part was exhausting – I kept putting it back on the mannequin to make sure it was sitting right. 

Then came my kick in the butt – about 3 weeks ago I scheduled my very first trunk show – where I’d be selling my pieces.  And I REALLY wanted to have this piece done.  So it was my motivation.  In the past 2 weeks is when it’s really come together – the assembly.  I’ve worked on other pieces too – but this was always waiting.  Having the mannequin helped a ton, and one of my smartest decisions, to wait to attach the clasp (which is also a button), was one of the best.

The clasp is a cool accomplish, in my mind at least.  I wanted the clasp to be seamless, so I decided on a larger snap attached to the underside of a button – but I had already bezeled all of my buttons (or so I thought) – so I went back to my stash and found a white button that I had missed. First I had to attach one side of the snap to the “right” side of my backer fabric, then I could glue the bezeled button on and edge it. 

so here it comes: IT’S DONE! IT’S DONE! IT’S DONE!
I can’t even express how happy I am, or how proud I am of myself.  That may sound weird but I’m self-taught and have never taken a class, just book reading, the occasional video, and a lot of trial and error.
image

image

image

image

image

image

image

life * love * beads

Superstition Blog Hop

A few months ago Tammy Adams of Paisley Lizard gave some designers the opportunity to create with a new design – these really cool “black cat” beads she made of polymer clay.  Each has a slightly different background, and some were drilled while others were left as cabochons

image

When I first received the bead it got lost on my kitchen counter – I put it in a “catch-all” basket and kept thinking it was a package for my husband lol.  Once it was in my bead room it was time to decide on a design!  I’m still not sure where the idea for this design came from but it’s 3 way convertible – so extremely versatile!

I started with a black/red variegated kumihimo then added red mother-of-pearl beads, star beads, a lampwork bead by Angela Hopkins, and a bunch of jumprings!  It can be worn as one big necklace with earrings, a necklace/bracelet/earring set, or a wrap bracelet and earrings. Very adjustable.  Pretty awesome!

image

Option 1 - 3 piece set

image

Option 2 - wrap bracelet

image

Option 3 - long necklace

Please hop on over to the other designers and see what they made!

life * love * beads

September Artisan Component Design Challenge

So I’m in a LOT of buying/selling groups on Facebook – mostly for beads, components and other pretty shiny things that I probably spend way too much money on!  About a month ago, on the Artisan Component Marketplace a giveaway was announced by Kari Asbury.  Simple to enter, just comment and then you got an extra entry for sharing the post.   I was one of the lucky recipients of the giveaway! The other 3 were: Betony Maiden, Robin Reed and Carolyn of Carolyn’s Creations.

This is what we were sent:

Components we were sent.

Components we were sent.

Each wood piece is unique so mine looks slightly different but you get the idea….they are created by Burl Girl and can be found here.  The colorful ceramic beads are made by Okawa African Beads and can be found here.

So first came the easy part – going through my stash and pulling out anything that even looked like it would match.  To me, each component in the kit didn’t seem to fit, except the wood and the rolo chain.  So I had already created 3 design piles in my head – now to add to them!

Components I gathered to go with the wood and rolo chain

Components I gathered to go with the wood and rolo chain

The wood piece immediately screamed “fall!” to me so I started pulling out oranges, browns and reds. As you can see I ended up with quite a handful of things to work with.

Components I gathered to go with the sari silk length

Components I gathered to go with the sari silk length

The sari silk seemed to match this pendant I have been hoarding for a few years now – I bought it originally with 11 others, each a different color, as part of what I called my “color exploration series” because I caught myself always turning towards the same type of colors.  After I bought it – the design I had wanted for it just didn’t seem to “work” so it’s been in my stash of artisan components (which is growing bigger every month).

After gathering what I had in my stash I started “building” the pieces in my head – seeing what things I needed and didn’t have, made a list on my phone then off I went to my LBS to get what I needed.  The following is what I came up with :

This is probably the easiest of all the designs – the sari silk was made to be a necklace!  I combined it with an amethyst bead by Kristie Brigham of Sculpted Windows.  My original design idea when I purchased the bead just didn’t work for me and I’m not one to force designs – if it doesn’t work I’d rather take the time to rip the design apart then be unhappy with it.

The sari silk is twisted with a white length of silk to accent the focal.  A swarovksi tassle, combining all the colors of swarovski on the amethyst, helped finish the design.  The crystals are on sterling silver headpins.  The pendant is on sterling filled wire and the S-clasp is plated.  The matching earrings combine the purple and white as well, and have a tiny 3 mm amethyst swarovski at the top.  Lampwork is by Susan Wehner.

The earrings

The earrings – lampwork by Susan Wehner, accented 3mm amethyst swarovski, finished with sterling headpins and earwires

The necklace

The necklace – this was probably the easiest of the designs – it all just fell together wonderfully. 

Closeup of the necklace

Closeup of the necklace – sterling headpins, swarovski crystals, pendant by Kristie Brigham of Sculpted Windows

This design was a little harder – I knew I wanted to go “fall” with this one, but couldn’t decide the exact direction I was looking for.  I pictured a filled netting as the necklace and it just seemed TOO blingy and thick for the centerpiece – but the lacquer on the wood screamed for some kind of shine – just not TOO much.  So I grabbed some greek leather cord when I was at the LBS, as well as an antiqued copper clasp.  This was the original design:  I have antique copper beads on either side of the wood piece, topped with lampwork by Jennifer Powers and a beaded bead by yours truly (this actually had to be made twice because on the first the RAW base was too wobbly, and when I decided to remake it the necklace was already assembled like this so I had to cut it off and weave it back onto the necklace directly). The knot above the beaded bead is a Celtic knot, done with 2 lengths (each side of the necklace). It was my first attempt at this so I’m really proud of myself.

The chain is what is throwing me off.  I really wanted to include it with the wood because it matched so well, but I just couldn’t make it happen, it seemed ok until I took these pics, then I was so not for it.

The original design

The original design

So off came the chain and I like it a lot better:

image

The final design

Closeup of the beaded bead

Closeup of the beaded bead

The earrings - lampwork discs by Jennifer Powers, rondelles by Susan Wehner

The earrings – lampwork discs by Jennifer Powers, rondelles by Susan Wehner.  knotted on greek leather cord, hanging from antique copper earwires

I also made another set of earrings that could be worn with the necklace…once I had taken the chain off the necklace I needed to do something with it!

image

"Mixed metal" earrings

The Okawa beads also stumped me a bit – this is what I came up with – though I’m not sure I’m happy with it – it’ll do for now but I’m probably looking at a “redo” somewhere down the road.  I hand knotted 5 mm white leather cord, and found some Greek ceramic beads that matched the ones sent wonderfully:

The Okawa beads

The Okawa beads

20151020_145542_wm

Bead Peeps REVEAL!!!! FINALLY!!!!

It’s finally time! The reveal for the very first annual Bead Peeps Swap ‘N Hop! I was lucky enough to have 2 partners so this will be a VERY long post but it will have lots and lots of sparkle and pretties!

The Bead Peeps Swap ‘n Hop is a fun event where you get a partner (or in my case 2), swap some beads, and make some awesome jewelry. The one “requirement” for the hop was including an artisan made component, which you could make yourself or purchase if, like me, you’re just not that talented.

First off a big shout out to our host Linda Anderson of CherryOnTopDesign!  She put a crap ton of work into matching partners and trying to give everyone a great time!  Make sure to head over to her blog and she what she created!

So as revealed in earlier posts my partners are Stephanie Haussler of Pixybug Designs and Kelly Hosford Patterson of Pyxeestyx – Traveling Sideshow. You can read about Stephanie here and Kelly here.  I really got lucky because each partner had their own distinct style.  Stephanie works with seed beads while Kelly is a textile artist.

Here is what I sent to my partners:

Sent to Kelly Hosford Patterson.  Artisan Component: Clay toggle, don't recall artist

Sent to Kelly Hosford Patterson.
Artisan Component: Clay toggle, don’t recall artist

Sent to Stephanie Haussler. Artisan components: Cab by Kinga Nichols, Shirbori ribbon by Deborah Weaver

Sent to Stephanie Haussler.
Artisan components: Cab by Kinga Nichols, Shirbori ribbon by Deborah Weaver

What I received from my partners:

Stephanie sent me and awesome collection of seed beads!

  • 4 mm firepolish
  • 2 type of czechmate 2 hole tiles (purple and peacock)
  • pearl druks
  • lemon lentils
  • quartz saucer beads
  • white halo pinch beads
  • czechmate bricks
  • rose halo melon beads
  • swarovski crystalette buttons
  • white 15/0
  • light green 11/0
  • purple seed bead mix
  • green superduo
  • lampwork cab by Chris Haussler (her husband)
Received from Stephanie Haussler Artisan components:  Lampwork cab by Chris Haussler

Received from Stephanie Haussler
Artisan components:
Lampwork cab by Chris Haussler

Close up of artisan component

Close up of artisan component

Kelly send an awesome arrangement:

1. Sari silk
2.  Periwinkle eyelash yarn
3.  Metallic purple Quartz crystal points
4.  Heliotrope Quartz crystal points
5.  Color shift lampwork glass rectangles with murrini (artist unknown)
6.  Purple Zebra Jasper rondelles
7.  Pink/purple/peach Agate coins
8.  Opaque purple cultured sea glass barrel beads
9.  Charcoal gray fresh water pearls with peacock luster
10. Light Sapphire cultured sea glass square spacers
11. Opaque sky blue Tiara glass crystal rondelles
12. Opaque periwinkle color shift Tiara glass crystal rondelles
13. Transparent periwinkle color shift Tiara glass crystal rondelles
14. Transparent lemon yellow Tiara glass crystal rondelles
15. texture copper rectangle beads
16. Hammered copper washers
17. lampwork glass satellites (artist unknown)
18. Upcycled tin Iris petals
19. Handmade copper hook closures
20. “Raven” hand stamped copper bracelet bar with Labradorite, Amethyst & copper wing dangles
21. “Ride like the wind” hand stamped etched copper motorcycle focal

Recieved from Kelly Hosford Pattern Artisan components: “raven” stamped copper bracelet bar with amethyst & labordorite, etched and stamped motorcycle copper square, hammered copper rings, hammered copper clasps (one with lampwork accent)

Close up of artisan components

Close up of artisan components

I was able to make TONS of goodies from each, and some pieces had components from both partners. I noticed that a lot of my pieces were either influenced by other artists or I used a pattern (which is not my norm, I’m not a big pattern person).  And I still have lots and lots of stuff I’ll be adding to my stash (hehe).

This piece I had a lot of fun with.  I was inspired by Beadist Artist from facebook.  She always does these wonderfully asymmetrical bead embroidery pieces with awesome fringe.  I used the lampwork cab made by Stephanie’s husband, pinch beads, peacock czechmate tiles, swarovski crystalette buttons, melon beads, firepolish, 11/0 and 15/0.  I also threw in some 11/0, O-beads, 2 hole triangles and delicas from my stash.  The rope is chenille stitch, the clasp is beaded to match, with a crystalette button at each end of the toggle bar.  This piece marks my first successful fringe, I’m extremely happy with it.

This slideshow requires JavaScript.

This ring was really fun to make – I didn’t have a direction when I started bezeling the rivoli, I just wanted to try to use the superduos to do it.  The waviness kinda threw me, and I almost ripped it apart, but I pushed through my un-comfortableness and ended up with this! It’s kinda big on, I think they call it a cafe ring.

This slideshow requires JavaScript.

I LOVE this bracelet.  You may notice some oxidation on the bar, and that’s because I’ve worn it so much since finishing it(the wing flaps wonderfully while on the bike!)  Purple is my favorite color so I was stoked when I saw these zebra jasper.  I pulled out my coiling “machine” for this one to make the wrapped bead you’ll see on the right.  Originally I was not going to include the melon bead, but I needed a medium “spacer”, and I noticed the headpins on the amethyst and labordorite were the same color.  It’s the perfect length with it included!  The style of the bracelet, stacking the jumprings, was inspired by Dhea Powers.  I made a simple pair of dangle earrings to match the bracelet.

This slideshow requires JavaScript.

I felt really special when I received this focal – this was a new medium (etching) for Kelly, and she knocked it out of the park! I debated back and forth whether to add lots of rondelle dangles, which was my original plan.  But it just didn’t seem to fit, so I went with simple.  I chose to put the clasp at the side because it would be a crime to hide something that awesome!  Then I chose rondelles that matched the lampwork bead to dangle from the corner.  I made 2 sets of earrings for this one in case I wanted something lighter.  The first set uses hammered rings and lampwork beads to match the toggle.  The second set is just a few stacked rondelles.

This slideshow requires JavaScript.

These earrings were just quick throw togethers, but oh so sparkly!  I love the tin petals and how they make ting ting noises with the rondelles against them as you wear em.  I debated adding more to each of them, but didn’t want to overdo it.

This slideshow requires JavaScript.

Silver is more my color so I wanted to use some of the zebra jasper for this bracelet.  The wire is silver-filled (my first use of it), the toggle is plated.  The sea glass barrels picked up the lighter tones in the jasper beautifully, I don’t know that I captured it that well.

This slideshow requires JavaScript.

I love the way this bracelet looks – it’s the Maze Lace pattern by Sabine Lippert.  To keep the profile low, I modeled the toggle after the thread path used for the bracelet.  Very sleek.

This slideshow requires JavaScript.

I got this awesome pattern from Pinterest (my downfall!!) while searching for ways to use 2-hole tiles as I haven’t worked with 2 holed beads a lot.  The pattern is by Alex Argai – she makes a lot of patterns with tila/2 holed tiles and superduos.  The clasp was an interesting venture.  After I made the bar I tried to reinforce it enough times to make it sturdy.  And it was pretty sturdy…..then I tried to attach the necklace.  I had run out of the beading needles I normally use (which are super cheap but I’ve never EVER broken one), so I had to use some I had picked up while out recently (not so cheap as I only got 4 needles for $5).  I managed to break ALL of them within an hour.  As I was attaching the bar, one of them broke inside of the superduos.  As in NONE of it was showing…..but it did make the bar really straight and sturdy so maybe it was a good thing?

Beads used from Stephanie: czechmate bar/rulla, pearl druks, peacock czechmate tiles

Beads used from Stephanie: czechmate bar/rulla, pearl druks, peacock czechmate tiles

superduo toggle clasp

superduo toggle clasp

So that’s what I made! I still have tons of things left!  Seriously don’t even feel like I made a dent in either stash I received.

Make sure you head over to my partners to see what they made, you can find the complete list of participants here.

Check out the Pinterest board I created just for the hop….if you’re a participant I can add you so you can post your items there as well!

ALSO – here’s some gorgeous picks of my golden boy modeling a piece with beads from each of my partners.  I’m surprised any of these came out decent as he kept thinking I was trying to play ball with him…..

This slideshow requires JavaScript.

NOTE: I have moderation on for all comments, so don’t freak out if you don’t see yours. This also guarantees I’ll see each bc it’ll ping right to my phone

Meet PyxeeStyx! (Kelly Patterson)

So if you’ve been following my blog you’ll know I’m involved in Bead Peeps Swap N Hop.  The deadline for bead sending was this past Saturday but on Wednesday I picked up a new partner!

She is Ms. Kelly Hosford Patterson.  I giggled a little when I realized my first partner is a Pixy and my second a Pyxee too. You can ogle Kelly’s work on her Etsy site.

The best part about this pairing is how different her style is from mine. She very much an organic, freestyle, found object, kinda hippie and really fun. She’s a successful businesswoman that likes to challenge herself with surprise kits and reinvent things into awesome pieces. These are a few of my favorites:

il_570xN.671296963_2df7

il_570xN.659605623_qu3v

She lives in SoCal, and loves the weather there in the winter, but says it’s almost unbearable in the summer.  She has a lot of family back east and can’t wait for the reunion at Lake Tahoe this summer.

We actually talked very little about beads in our 3 hour chat, though I did find out she has a hard time writing for her blog because she just writes so much and can’t stop (if you have a moment check out this post she did about dyeing pearls – who even knew you could do that?!).

Luckily I was paid Friday so I hopped on over to my LBS and got to looking. I found some things that seemed right up her alley, then came home and went through my stash to find more that I thought would challenge her. I just went searching for the pic of her items and found I deleted it from my phone, I’ll have to check if it’s on my computer later – but her package did go out today!

update: this is what I sent her lol

20150314_084128

Can’t wait to see what she scrounges up for me!(my only request was no seeds as my other partner is a seeder – I really want to stretch myself!)

Vintage Organic Challenge

ANOTHER POST! This must be a record….So I sometimes get beads from Lisa Lodge for her challenges.  Today is the Vintage Organic Challenge.  I received some gorgeous beads:

wpid-20150306_135134.jpg

20150306_135256

I started creating the rivoli piece as soon as I got the beads, but set it aside because I know how hard it is for me not to share things.  Then I kept looking at it and the necklace part just wasn’t coming to me…..So within the past 10 days this is what I’ve created!

Necklace:

I’m not spectacularly happy with the clasp (magnetic) on this one so I’ll probably be taken apart and redone at some point.

The “pattern” for the rivoli bezel is my own – created as I went.  It’s also reversible since I finished the back

20150314_082847

20150314_082955

20150314_083046

Set:

This was a very simple set I did – it started with the earrings.  Dainty and spring like, perfect for the weather we’ve been having lately! (I used ALL the metal flower beads on this one, which I’m kinda sad about, but it is really cute)

20150314_083627

20150314_083531

20150314_083436Bracelet:

This pattern was offered as a freebie in one of my facebook groups and is (translated) by Kariti Lenita Barre. (Bangle a la Gemstone)  This is the first bangle I’ve created [sucessfully] so I want to send a big shout our to Kariti!

20150314_083646

20150314_083653

20150314_083705

I still have LOTS of pearls and jasper gemstones left…..SOOOOO many possibilities!

Thanks for reading!

Posting fool! (Have a drool rag handy)

My third post in a month! I’m on a roll! This will be a little of this and that, and a whole lot to drool over….

So if you’ve been following my blog you’ll know I’m participating in the 1st annual Bead Peeps Swap N Hop hosted by Linda Anderson.  This is my 2nd hop of this nature.  My partner this year is Stephanie Haussler, you can read about her here.

Both of us were excited to get started and mailed our packages out almost the same day. So now I can show you what I sent her. Drumroll……..

image

The cab is by Kinga Nichols (if you’ve never seen her work, Google it, she’s amazing).  The ribbon is by Deborah Weaver.  You can’t see it that well but the clasp matches the cab, it’s a leaf.  The seed bead options included delica, several colors of seed beads, 15/0, pearls, 2 different types of triangle beads and montees.

Now for what Stephanie sent me.

image

image

image

Isn’t it gorgeous? Her husband Chris (who is also participating), made that lampwork cab and I love it!
She included a gorgeous selection of 2 holed beads, 11/0, 15/0, druks, lentils and an amazing purple mix!

I do have to say though, I’m stumped. I’ve only had the beads about a day so I’m letting it simmer, but so far nothing has popped out at me.  2 holed beads always drive me crazy(in a good way), and I’ve never worked with czechmates or tiles so it’ll be fun but very challenging.

I’ve had lots of beady mail lately.  I (finally!) got my dragon scales so I can start my dragon soon (the 15/0 Stephanie sent will actually work perfect for his belly!). And got the beads for seed bead and glass challenge :

image

This weekend is the vintage organic challenge, I’ll prb have to post early Friday bc I work all Saturday, but this is what I’ve been working with:

image

Woot!

So excited because all the beads for my partner FINALLY came. I won’t even go into the horrible experience with ordering I had….suffice it to say I WILL NOT be ordering from that company again.  Anywho…..here are some nice teaser pics of what I got my partner…..all packed and ready to go early next week

image

image

image

As a side note…..NOT keeping all of these was really hard because I really fell in love with this palette as I was shopping

Don’t forget to keep an eye out for what I receive and the hop on May 2nd!

Side note #2: no seed beads ended up on the floor during this picture session so I’m calling it SUCCESS